ICOM 297000 Manuale Utente
XI
QUICK REFERENCE GUIDE
■ Programming memory channels
The IC-2820H has a total of 522 memory channels
(including
20 scan edges and 2 call channels)
for storing often used operat-
ing frequency, repeater settings, etc.
Any memory channel can be recalled from either left or right
band.
Any memory channel can be recalled from either left or right
band.
1. Setting a frequency
In VFO mode, set the desired operating frequency with re-
peater, tone and tuning steps, etc.
➥ Push the desired band’s [V/MHz•SCAN] to select VFO.
peater, tone and tuning steps, etc.
➥ Push the desired band’s [V/MHz•SCAN] to select VFO.
➥ Rotate the same band’s [DIAL] to set the desired fre-
quency.
• Set other data, such as repeater tone, duplex information, tuning
step), if desired.
2. Selecting a memory channel
Push and hold the same band’s [M/CALL•MW] for 1 sec.,
then rotate the same band’s [DIAL] to select the desired
memory channel.
then rotate the same band’s [DIAL] to select the desired
memory channel.
• “X” indicator and memory channel number blink.
3. Writing a memory channel
Push and hold the same band’s [M/CALL•MW] for 1 sec. to
program.
program.
• 3 beeps sound
• Return to VFO mode automatically after the program.
• Memory channel number automatically increases when continuing
• Return to VFO mode automatically after the program.
• Memory channel number automatically increases when continuing
to push the [M/CALL•MW] after programming.
Push [M/CALL•MW] for 1 sec.