ICOM 297000 Manuale Utente

49

6

CALL CHANNEL OPERATION

■ Programming a call channel

Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) can be programmed into the call channel.

q Set the desired frequency in VFO mode.

➥ Push the desired band’s [V/MHz•SCAN] to select VFO

mode.

➥ Set the frequency using the same band’s [DIAL].

➥ Set other data as desired.

w Push the same band’s [M/CALL•MW] for 1 sec.
e Rotate the [DIAL] to select the desired call channel.

• “X” indicator and “C0” or “C1” blink.

r Push the [M/CALL•MW] for 1 sec. to program.

• 3 beeps sound and the unit returns to VFO mode automatically.

z Push and hold [MR/CALL] for 1 sec. to select

call channel mode.
➥ Push [Y] or [Z] to select desired call chan-

nel.

x Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency.

c Push [FUNC] then [

CLR

A(MW)] for 1 sec. to

program.

• 3 beeps sound.

MR/CALL

MW

[Y]/[Z]

[EXAMPLE]: Programming 145.120 MHz into the call channel 1 via the microphone.

Push       , then push        for 1 sec. 

➠

Push          to select the call channel “C1”.

Beep

Beep

Beep

“

“

“

“

“

Set the frequency.

Push and hold         for 1 sec. to 
select call channel mode.

Push         to select VFO mode.