ICOM 297400 Manuale Utente
11
3
MEMORY OPERATION
0
3
■
Programming example
The following is an example showing how to program 126.000 MHz into regular memory channel 4.
“ ” appears when no frequency
has been programmed into regular
memory channel 4.
has been programmed into regular
memory channel 4.
“MEMORY” and the channel number
appear.
appear.
“126.00” appears in the standby
display.
display.
126.00
5
134.80
RX
CH01
134.80
RX
MEMORY
CH04
134.80
RX
MEMORY
CH04
126.000
---.---
134.80
RX
MEMORY
REPLACE Ç
CH04
126.00
5
134.80
RX
MEMORY
Set a “126.000 MHz” in the
standby display.
standby display.
q
Push
[RCL], then rotate
[O-DIAL] to select “MEMORY”.
w
Push
[MEM], then rotate
[O-DIAL] to select “REPLACE.”
r
Push
[MEM] to store the
desired frequency into the
selected regular memory
channel.
selected regular memory
channel.
t
Select regular memory channel
4 with
4 with
[DIAL].
e
“WRITE COMPLETED” is displayed
when the selected frequency is
stored.
when the selected frequency is
stored.
Regular memory channel number
blinks.
blinks.
TIP:
Hold down
[MEM] for 2 seconds to program a displayed frequency into any blank memory channel automatically, after
step q.
NOTE:
The programming is cancelled if all regular memory channels have already programmed.