ICOM 297400 Manuale Utente
18
3
MEMORY OPERATION
■
GPS memory edit
The received GPS memory data is stored in the desired
group memory channel.
group memory channel.
q
Push
[RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
• The memory channel name also appears if it has been entered.
w
Rotate
[O-DIAL] to select the GPS memory channel.
• “GPS” appears.
e
Push
[MEM] to enter the GPS memory channel edit
mode, then rotate
[O-DIAL] to select a desired group
memory.
• “GPS” and airport code blink.
r
Push
[MEM] to store the GPS memory channel data to
the selected group memory.
t
Push
[RCL] to exit the memory mode.
NOTE:
The GPS memory data is overwritten if the se-
lected GPS memory channel already contains other data.
■
Memory protection
The transceiver has memory protection which inhibits to
the editing (storing, deleting, replacing, etc.) of the memory
group memory channels.
Refer to “Memory Protection” (p. 24) for details.
the editing (storing, deleting, replacing, etc.) of the memory
group memory channels.
Refer to “Memory Protection” (p. 24) for details.