ICOM 301500 Manuale Utente

38

4

RECEIVE AND TRANSMIT

D CW side tone function

When the transceiver is in receive (and the break-in 
function is OFF— pgs. 55, 56) you can listen to the 
tone of your CW signal without actually transmitting.

This allows you to spot your transmit signal exactly 
compared to another station’s. This also convenient 
for CW practice.

q  When CW (CW-R) mode is selected, push and hold 

 for 1 sec. to enter the quick set mode.

w  Rotate [M-CH] to select “SIDE LVL”, then rotate 

[DIAL] to adjust the side tone level.

 

• Side tone level is adjusted in 1% steps (0% to 100%).

e  Push 

 to exit the quick set mode and re-

turn to normal operation.

D Keying speed setting

The transceiver’s internal electronic keyer speed can 
be adjusted from 6 to 60 wpm.

q  When CW (CW-R) mode is selected, push and hold 

 for 1 sec. to enter the quick set mode.

w  Rotate [M-CH] to select “KEY SPD”, then rotate 

[DIAL] to adjust the keying speed.

e  Push 

 to exit the quick set mode and re-

turn to normal operation.