ICOM 301500 Manuale Utente
N Quick set mode
Mode
Set mode item
Default setting
SSB
1 RF POWER
100%
2 MIC GAIN
50%
3 DATA MODE
OFF
CW
1 RF POWER
100%
2 KEY SPEED
20WPM
3 CW PITCH
600Hz
4 SIDE TONE LEVEL
30%
5 SIDE TONE LIMIT
ON
RTTY
1 RF POWER
100%
2 TWIN PEAK FILTER
OFF
3 RTTY MARK TONE
2125Hz
4 RTTY SHIFT
170Hz
5 RTTY KEY POLARITY
NORMAL
AM
1 RF POWER
100%
2 MIC GAIN
50%
3 DATA MODE
OFF
RF power
(all modes)
This item adjusts the RF output power. The RF output
power can be adjusted from L (Low), 1% to 100% in 1%
steps.
power can be adjusted from L (Low), 1% to 100% in 1%
steps.
100% (default)
Mic gain
(SSB/AM modes)
This item adjusts microphone gain from 0% to 100% in
1% steps.
1% steps.
50% (default)
Data mode
(SSB/AM modes)
This item turns the data mode ON or OFF.
When the data mode is turned ON, the audio input from
the [ACC] connector* is used for transmission instead of
[MIC] connector and the speech compressor function is
turned OFF.
When the data mode is turned ON, the audio input from
the [ACC] connector* is used for transmission instead of
[MIC] connector and the speech compressor function is
turned OFF.
* The desired connector can be selected. (p. 77)
on :
Data mode operation is enabled.
(“
(“
” appears.)
oF :
Data mode operation is disabled.
(“
(“
” disappears.)
OFF (default)
71
10
SET MODE