ICOM 301500 Manuale Utente

To distinguish equipment, each CI-V transceiver has its 
own Icom standard address in hexadecimal code.
The IC-7200’s address is 76h.
When 2 or more IC-7200s are connected to an optional 
CT-17 CI-V LEVEL CONVERTER, rotate [DIAL] to select 
a different address for each IC-7200 in the range 01h to 
7Fh.

76  : Address of 76h

76h (default)

Transceive operation is possible with the IC-7200 con-
nected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, operat-
ing mode, etc. on the IC-7200 automatically changes 
those of connected transceivers (or receivers) and vice 
versa.

on : Transceive ON
oF : Transceive OFF

ON (default)

Adjusts the internal reference signal frequency within 0% 
to 100% range in 1% steps during frequency calibration.

 NOTE: Default setting is different for each transceiver.

D Paddle operation from [MIC] connector

Connect a CW paddle as at right to operate an elec-
tronic keyer from the [MIC] connector.
•  Be sure to select “Paddle Polarity,” “Keyer Type” and 

“Mic Up/Down Keyer” in the set mode. (p. 80)

• Connect straight key to “DOT” side.
•  Push both of “DOT” and “DASH” to activate the 

squeeze operation.

MIC connector

CW
paddle

DOT

DASH

3.9 k

ø ±5%

2.2 k

ø ±5%

MIC U/D 

e

GND 

y

82

10

SET MODE