ICOM 318200 Manuale Utente
33
3
BASIC OPERATION
N
The IC-7410 has a built-in voice synthesizer to an-
nounce the operating frequency, mode and S-meter
level in clear, electronically-generated voice, in Eng-
lish (or Japanese).
First, select the desired parameters to be announced
in the Set mode. (p. 87)
nounce the operating frequency, mode and S-meter
level in clear, electronically-generated voice, in Eng-
lish (or Japanese).
First, select the desired parameters to be announced
in the Set mode. (p. 87)
)NITIAL
s
s
s
± Push [SPEECH] to announce the S-meter level*
and currently selected frequency.
s
ceiver announces the operating mode after the fre-
quency.
quency.
*
The S-meter level announcement can be turned OFF.
(p. 87)
(p. 87)
± Push a mode switch to announce the appropriate
mode, when the “SPEECH [MODE] SW” item is set
to “ON” in the Set mode. (p. 87)
to “ON” in the Set mode. (p. 87)
N
The transceiver has four transmit meter functions for
your convenience. In addition to Po and ALC, you can
display the SWR or COMP meter by holding down
;!.4s-%4%2=
your convenience. In addition to Po and ALC, you can
display the SWR or COMP meter by holding down
;!.4s-%4%2=
s
s
ment shows the input signal level exceeds the
allowable level, the ALC limits the RF power.
In such cases, rotate the [MIC] control counter-
clockwise to decrease the microphone gain.
allowable level, the ALC limits the RF power.
In such cases, rotate the [MIC] control counter-
clockwise to decrease the microphone gain.
s
quency.
s
speech compressor is in use.
[SPEECH]
]
s
The RF output power
meter becomes the
S-meter in receive.
meter becomes the
S-meter in receive.