ICOM 318200 Manuale Utente

42

4

RECEIVE AND TRANSMIT

D

This Set mode is used to set the CW sidetone, mem-
ory keyer repeat time, dash weight, paddle specifica-
tions, keyer type, etc.

q  In the CW mode, push [MENU] to display the “M1” 

screen (Menu 1).

w  Push [KEY](F-4) to display the “KEY” screen (Mem-

ory Keyer).

e  Push [SET](F-5) to enter the Keyer Set mode.

r  Push [Y](F-1) or [Z](F-2) to select the desired 

item.

t  Rotate [DIAL] to select the desired option.

s

ting, if desired.

y  Push [MENU] to save, and return to the “KEY” 

screen.

u  Push [MENU] again to return to the “M1” screen.

Select the CW sidetone output level.

s

Set the CW sidetone level limit. When the [AF] con-
trol is rotated above a specified level, the CW sidetone 
does not increase.

s

When sending CW using the repeat timer, this item 
sets the time between transmission.

s

When you are in the “SEND” screen (Keyer Send), 
channel numbers are displayed above the function 
keys. However, you can display the first three charac-
ters of the keyer memory instead of the channel num-
ber.

Select whether to display the channel number or the 
first three characters of the keyer.

s

keyer memory.

Set the dot/dash ratio.

s

DASH

Weight setting:

1:1:3 (default)

Weight setting:

Adjusted

DASH

DOT (fixed*)

Adjustable range

SPACE (fixed*)

*SPACE and DOT length can be 

  adjusted with only [KEY SPEED].

This item sets the rise time of the transmitted CW en-
velope.

s

Key action

Tx output power

Tx

Rx

Set Tx power level

Time

0

If the rise time of a CW waveform is too short, key 
clicks on nearby frequencies can be generated.

 Continued on the next page.

1      

5 0 %

SET

Side Tone Level

Select the item

Reset to the default 
setting