ICOM 318200 Manuale Utente

88

SET MODE

10

Set the rate at which frequencies are scanned while 
holding down the microphone [UP]/[DN] switches.

s

Select the RIT/

∂TX frequency offset clearing opera-

tion with [CLEAR].

s

RIT and 

∂TX frequency offset.

s

∂TX frequency offset.

Select the Auto, Manual or Auto/Manual notch filter to 
be used for SSB mode operation.

s

s

used.

s

can be used.

Select the Auto, Manual or Auto/Manual notch filter 
used for AM mode operation.

s

s

used.

s

can be used.

Turn the manual notch filter width display ON or OFF.
When this item set to ON, and the manual notch filter 
is selected with [NOTCH], the manual notch filter width 
appears on the function display.

Turn the IF filter passband width and shift value dis-
play ON or OFF.
When this item set to ON, and the [TWIN PBT] control 
is rotated, the passband width and shifting value ap-
pear on the function display.

Turn the IF filter passband width and shift value dis-
play ON or OFF.
When this item set to ON, and [FILTER] is pushed, 
the passband width and shifting value appear on the 
function display.

Turn the Displayed Frequency Shift function ON or 
OFF.
When this function is turned ON, the audio pitch or 
tones of the received signal will remain the same, even 
when the operating mode is changed between SSB 
and CW.
The amount of frequency shift may differ, depending 
on the CW pitch setting.

s

erating mode is changed between SSB and 
CW.

Select the sideband used to receive CW in the CW 
normal mode between LSB and USB.

In the CW mode, select KEYER-Root or KEYER-
SEND as the menu that appears first after pushing 
[KEY](F-4) in the “M1” screen (Menu 1).

s

Turn the external keypad ON or OFF for keyer mem-
ory transmission.

See page 18 for the equivalent circuit of an external 
keypad and connection.

s

tion.

s

external keypad switches transmits 
the desired keyer memory con-
tents.