ICOM 322800 Manuale Utente
9
3
PREPARATION
New2001
1
2
3
4
5
6
6
7
8
9
10
11
12
13
14
15
16
16
■
Initial setting mode
The Initial setting mode allows you to set the vessel’s infor-
mation that is exchanged among the vessels and/or base
stations. And, you can set the seldom-changed NMEA Input/
stations. And, you can set the seldom-changed NMEA Input/
Output settings.
NOTE: After the MMSI code programming, the transpon-
der automatically enters the Initial setting mode. In this
case, skip steps
der automatically enters the Initial setting mode. In this
case, skip steps
q
and
w
.
q
Push [MENU] to enter the Menu mode.
w
Push [
∫
] or [
√
] to select “Initial Setting,” then push [ENT].
e
Push [
∫
] or [
√
] to select the desired item, then push [ENT].
r
Enter the characters or select the desired option.
The procedures are described on pages 10 to 13.
t
Repeat steps
e
and
r
to set other items.
y
Push [CLEAR] to exit the Initial setting mode, and return
to the Menu mode.
to the Menu mode.
u
Push [CLEAR] to exit the Menu mode.
[CLEAR]
[ENT]
[MENU]
[
∫
]
[
√
]
D MMSI code
Enter the vessel’s MMSI code.
See page 7 for setting details.
See page 7 for setting details.
• If the MMSI code has already been set, you cannot change this.
D
Name
Enter the vessel’s name of up to 20 characters.
See page 13 for setting details.
See page 13 for setting details.
D
Call Sign
Enter the Call Sign of up to 7 characters.
The Call Sign is a unique designation ID for a station.
See page 13 for setting details.
The Call Sign is a unique designation ID for a station.
See page 13 for setting details.