ICOM 325000 Manuale Utente
9
FREQUENCY AND CHANNEL SETTING
3
N VFO and memory channels
The IC-R6 has 2 normal operating modes: the VFO mode
and the memory mode.
and the memory mode.
The VFO mode is used for a desired frequency setting
within the frequency coverage.
± Push [V/M] to select the VFO mode.
within the frequency coverage.
± Push [V/M] to select the VFO mode.
T h e m e m o r y m o d e i s u s e d f o r q u i c k r e c a l l t h e
preprogrammed memory channels.
± Push [V/M] to select the memory mode.
preprogrammed memory channels.
± Push [V/M] to select the memory mode.
• See p. 16 for memory programming details.
[DIAL]
“
” and memory channel
number appear.
• VFO mode display
• Memory mode display
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator.
Operating frequencies are generated and controlled by the
VFO.
VFO is an abbreviation of Variable Frequency Oscillator.
Operating frequencies are generated and controlled by the
VFO.
N Operating band selection
The receiver can receive the AM broadcast, HF band, 50 MHz,
FM broadcast, VHF air, 144 MHz, 300 MHz, 400 MHz, 800
MHz,* 1200 MHz, television channels or Weather channels
FM broadcast, VHF air, 144 MHz, 300 MHz, 400 MHz, 800
MHz,* 1200 MHz, television channels or Weather channels
†
.
± Push [BAND] repeatedly to select a desired frequency
band.
• When the memory mode is selected, push [V/M] to select the
VFO mode first, then push [BAND] to select a desired band.
± While holding down [BAND], rotating [DIAL] also selects
frequency band.
[DIAL]
Available frequency bands are differ depending on ver-
sion. See the specification for details.
sion. See the specification for details.
*Some frequency ranges are inhibited for the USA version
due to local regulation.
†
Available in only the USA version.