ICOM 325000 Manuale Utente
N Monitor function
This function is used to listen to weak signals, without dis-
turbing the squelch setting. It can also be used to open the
squelch manually, even when mute functions such as the
tone squelch are in use.
turbing the squelch setting. It can also be used to open the
squelch manually, even when mute functions such as the
tone squelch are in use.
± Hold down [SQL] to monitor the receive frequency.
• The 1st segment of the S-meter blinks.
The 1st/2nd segments blink
The [SQL] switch can be set to a ‘sticky’ operation in the
Expand set mode. See page 43 for details.
Expand set mode. See page 43 for details.
N Attenuator function
The attenuator prevents a received signal from distorting
when very strong signals are near a desired frequency, or
when very strong electric fields, such as from a broadcasting
station, are near your location.
when very strong signals are near a desired frequency, or
when very strong electric fields, such as from a broadcasting
station, are near your location.
± While holding down [FUNC], push [ATT](SQL) to toggle
the attenuator function ON or OFF.
• “ATT” appears when the attenuator functions is in use.
“ATT” appears while the
attenuator functions is in
use.
attenuator functions is in
use.
15
4
BASIC OPERATION