ICOM 325100 Manuale Utente

30

7

SCAN OPERATION

■ Scan start/stop

D

If desired, set the scan resume option (p. 33), program 
the scan edges (p. 31), program 2 or more memory 
channels (p. 17), set the skip channels (p. 32).

D

q  Select the mode or bank.
   For full/programmed scan:
 

➥  Push [V/MH  z] to select the VFO mode. 

  For memory scan:
 

➥  Push [M/CALL] to select the memory mode.

  For bank scan:
 ➥ 

 

Push  [BANK], and then rotate [DIAL] to select 
the desired bank.

w  Set the squelch to the point where the noise is just 

muted.

e  Hold down [SCAN] (V/MHz) for 1 second to start 

the scan.

 • 

Rotate 

[DIAL] to change the scanning direction.

 • 

 

The scan type blinks in the memory channel read-
out.

r  Push [SET] to switch between a full scan and a pro-

grammed scan (P1, P2 and P3).

 

• 

Push [V/MH  z] to cancel the scan.

z  Select the mode or bank.
   For a full/programmed scan:
 

➥  Push [VFO] 

 to select the VFO mode. 

  For a memory scan:
 

➥  Push [MR] 

 to select the memory mode.

  For a bank scan:
 ➥ 

 

Push  [BANK] 

, and then push[

Y] or [Z] to 

select the desired bank.

x  Set the squelch to the point where noise is just mut-

ed.

c Push [SCAN] 

 to start the scan.

 • 

 

Hold down [

Y] or [Z] for 1 second also starts the 

scan.

v  Push [SET] 

 to switch between a full scan and 

programmed scan (P1, P2 and P3).

b  Push [SCAN] 

 or [CLR] 

 to stop the scan.

During memory scan

Hold down [SCAN] (V/MHz) for 1 second.

Push [M/CALL].

Scan edge channel display.
• P1 stands for 1A/1b
• P1 to P3 are selectable when 

they are programmed, and 
switched with [SET].

Push  [SET] to select a full,  
band or programmed scan (P1, 
P2 and P3) in sequence.

During memory scan

Push        .

Push        .

[i.e.]:  Starting a memory scan.

[i.e.]:  Starting a memory scan.