ICOM 325100 Manuale Utente

33

7

SCAN OPERATION

■ Scan Resume function

Various pause and timer options can be selected with 
the Scan Resume function. The selected resume op-
tion is also used for Priority Watch. (p. 35)

q Push [SET] to enter the Set mode.

w  Push  [SET] or [MONI] until “SCT” or “SCP” ap-

pears.

e Rotate [DIAL] to set the desired timer:
 • 

“SCP-2”–"SCP-20” 

: 

 

The scan pauses for 2 to 
20 seconds, when a signal is 
received.

 • 

“SCP-HO” 

: 

 

 When a signal is received, the 
scan pauses until it disappears.

 • 

“SCT-0”–"SCT-5”  : 

 

The scan pauses, then re-
sumes 0 to 5 seconds after 
the signal disappears.

 • 

“SCT-HO” 

: 

 

The scan continues to pause, 
even if the signal disappears.

r  Push any keys other than [SET] or [MONI] to exit 

the Set mode.

 

z  Push [SET] 

 to enter the Set mode.

x  Push  [SET] 

 or [ENT] 

 until “SCT” or “SCP” 

appears.

c  Push [Y] or [Z] to select the scan resume option.
  • See step 

e above for details.

v Push [CLR] 

 to exit the Set mode.

  NOTE:  The Set mode cannot be accessed when 

memory names are displayed. To set the scan re-
sume option, return to the frequency display by hold-
ing down [MONI] (ANM) on the front panel for 1 sec-
ond, or push [FUNC] 

 then [MONI] 

 (on the 

HM-133V) to cancel the channel name display, and 
then set the option as described on above.

When a signal is received, the 
scan pauses until it disappears.

The scan will resume 5 seconds 
after the signal disappears.