ICOM 325100 Manuale Utente

37

9

DTMF MEMORY ENCODER

■ Transmitting a DTMF code

D

q  Hold down [OPT] (BANK) for 1 second to enter the 

Option Set mode.

w  If necessary, push [SET] or [MONI] to select “DTM.”

e  Rotate [DIAL] to turn ON the DTMF encoder.

r  Push [BANK] to enter the DTMF memory mode.
  • The DTMF memory channel display blinks.
 • 

 

If desired, push [BANK] again to return to the Op-
tion Set mode.

t  Rotate [DIAL] to select a desired blank DTMF mem-

ory channel.

  • The DTMF memory channel display blinks.
y  Push any key other than [SET] or [MONI], to save 

the selection and exit the DTMF memory mode. 
• “d” appears in the 100 MHz digit.

u  Push [PTT].
  •  The selected DTMF code is transmitted.

D  Transmitting a DTMF memory using the 

z  Push [FUNC] 

 then [DTMF] 

 to turn ON the 

DTMF memory encoder.

  • “d” appears in the 100 MHz digit.
x  Push [DTMF-S] 

 to turn ON the DTMF memory 

direct selection.

 • 

 

The function LED on the microphone lights green.

c Push a desired DTMF channel number.
 • 

 

The selected DTMF code is automatically transmit-
ted without pushing [PTT].

    NOTE: When the pushed channel number is not as-

signed a DTMF code, the previously transmitted DTMF 
memory code is transmitted.

v  Push  [DTMF-S] 

 again to turn OFF the DTMF 

memory direct selection.

 • 

 

The function LED on the microphone goes out.

b  Push [FUNC] 

 then [D-OFF] 

 to turn OFF the 

DTMF memory encoder.

D Manual transmission using the HM-133V

z  If necessary, push [FUNC] 

 then [D-OFF] 

 to 

turn OFF the DTMF memory encoder.

x  Push [DTMF-S] 

 to turn ON the DTMF direct se-

lection.

 • 

 

The function LED on the microphone lights green.

c  Push one of A to F keys, and then push the desired 

DTMF keys; 0–9 or A to F.

 A: 

 B: 

 C: 

 D: 

  E: [M] 

 F: 

  • Automatically transmits without pushing [PTT].
 • 

 

The fi rst code entered may not be transmitted because 
transmitting takes 400 milliseconds to start. Then the 
DTMF code transmission starts from the 2nd code.

v  Push  [DTMF-S] 

 again to turn OFF the DTMF 

direct selection.

 • 

 

The function LED on the microphone goes out.

[i.e.]:  Transmitting the DTMF code in the DTMF mem-

ory channel “d4.”

[i.e.]:  Transmitting the DTMF code in the DTMF mem-

ory channel “d4.”

[i.e.]:  Transmitting the DTMF code “54A2F.”

Rotate [DIAL] to turn ON the DTMF encoder, and then push [BANK].

Rotate [DIAL], and then push any key other than [SET] or [MONI].

Push [PTT].

Hold down [OPT] (BANK) for 1 second.

Push        then       .

Push        , and then push a desired DTMF channel number.

Push        and then, sequentially push                                     .