ICOM 325100 Manuale Utente

45

11

OTHER FUNCTIONS

D

Set the backlight brightness to between 1 (Dark) and
4 (Bright; default).

D

Set the Auto Dimmer brightness. 
The Auto Dimmer function automatically reduces the 
backlight brightness if no operation has been performed 
for 5 seconds. 
• “ATD OF” (default) :   Auto Dimmer function is turned 

OFF. The backlight is continuously 
ON, while the transceiver is turned 
ON.

• “AT OF” 

:  The backlight automatically turns 

OFF if no operation has been per-
formed for 5 seconds.

• “AT D1” – “AT D3” :  The backlight lights with the level 

1 (Dark) to 3 (Bright), if no opera-
tion has been performed for 5 sec-
onds.

D

Select the display backlight color from Amber (default), 
Yellow or Green.

Amber (default)

Yellow

D

Adjust the LCD contrast.
Adjustable level: 1 (the lowest contrast) to 4 (the high-
est contrast).

Contrast level “2” (default)

D

Select “OFF” to inhibit transmitting on the channel.
This function can be independently set for each memo-
ry channel, Call channel and VFO.

Transmit is permitted. (default)

Transmit is inhibited.

D

Turns the Skip function ON (skip) or OFF.
This item appears only when the Set mode is accessed 
from the memory mode.

Scans the memory channel during 
memory or bank scan. (default)

Skips the memory channel during 
a memory or bank scan.

D

Assign the desired memory channels and scan edge 
channels to the memory bank, for easy memory man-
agement. 10 banks, Bank-A to Bank-J, are selectable.
This item appears only when the Set mode is accessed 
from the memory mode.

Not assigned (default)

Assigned to the bank A

D

The transceiver has 10 banks, A to J. Regular memory 
channels 0 to 199, and scan edge channels 1A to 3B, 
can be assigned into the desired bank for easy memory 
management. 
The link function has a continuous banks scan that scans 
all contents in the selected banks during the scan.
This item appears only when the Set mode is accessed 
from the memory mode.

Bank link OFF (default)

Bank link ON

• Setting the Bank link
q  Rotate  [DIAL] to turn ON the Memory Bank Link 

function.

w  Push [SET] or [MONI] to select the desired bank to 

be linked.

e  Rotate [DIAL] to select “ON” to link the bank.

r Repeat steps w and e, to set the links.

D

Set both the transmission and reception passband 
width to wide or narrow.
This setting can be independently set for each memory 
channel, Call channel and VFO. 

Wide (default)

Narrow