ICOM 325300 Manuale Utente
24
5
REPEATER AND DUPLEX OPERATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N Repeater operation
When using a repeater, the transmit frequency is shifted from
the receive frequency by the frequency offset
the receive frequency by the frequency offset
(p. 54)
. This is
called duplex operation. It is convenient to program repeater
information into memory channels
information into memory channels
(p. 29)
.
Station A
Station B
Repeater
145.300 MHz
144.700 MHz
144.700 MHz
145.300 MHz
Uplink
Downlink
(transmitting freq.)
(receiving freq.)
q Set the receive frequency
(repeater output frequency)
.
w Set the shift direction of the transmit frequency.
(DUP– or
DUP; see p. 26 for details.)
• When the auto repeater function is in use (U.S.A. and Korean
versions only), this selection and step
e are not necessary.
(p. 27)
“DUP–”or “DUP” appears
[PTT]
T
Appears
e Push and hold [TONE](0) for 1 sec.
to activate the subaudible tone
encoder, according to repeater re-
quirements.
encoder, according to repeater re-
quirements.
• “T” appears.
Refer to p. 53 for tone frequency set-
tings.
rPush and hold [PTT] to transmit.
• The displayed frequency automati-
cally changes to the transmit fre-
quency (repeater input frequency).
quency (repeater input frequency).
• If “OFF” appears, check the frequency
offset or shift direction. (p. 26)
While receiving
While transmitting
tRelease [PTT] to receive.
y Push and hold [MONI](BAND) to check whether the other
station’s transmit signal can be directly received or not.
U.S.A. and Korean versions:
Auto repeater function uses standard values of the re-
peater tone frequency and frequency offset.
peater tone frequency and frequency offset.