ICOM 325300 Manuale Utente
39
6
MEMORY/CALL CHANNELS
N Erasing/transferring bank contents
The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
cleared or reassigned to another memory bank.
INFORMATION: Even if the memory bank contents are
cleared, the memor y channel contents still remain
programmed.
cleared, the memor y channel contents still remain
programmed.
q Select a desired bank contents to be transferred or erased
from the bank. (p. 33)
± Push [BAND] to enter the memory bank selection
mode.
± Rotate [DIAL] to select a desired memory bank group,
then push [BAND].
± Rotate [DIAL] to select the bank channel.
[DIAL]
w Push [S.MW](V/M/C) for 1 sec. to enter the select memory
write mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically, and
• Displays the original memory channel number automatically, and
then “
” icon and memory channel number blink.
• Do not hold [S.MW](V/M/C) for more than 2 seconds, otherwise
the memory contents will be copied to VFO.
e Push [SET] repeatedly to select “bAnk.”
r Push [BAND] to toggle the bank channels selection or the
bank group selection.
t Rotate [DIAL] to select a desired bank group or channel to
be transferred.
• Select “– – – –” display when erasing the contents from the
bank.
[DIAL]
To transfer the bank contents
to ch 11 in Bank b.
to ch 11 in Bank b.
To erase
Bank channel is displayed.
is displayed.
y Push [S.MW](V/M/C) for 1 sec. to erase/transfer the bank
contents.