ICOM 325300 Manuale Utente

N Memory scan 

IMPORTANT!: To perform memory scan, 2 or more mem-
ory channels MUST be programmed, otherwise the scan 
will not start.

q  Push [V/M/C] repeatedly to select the memory mode.

wSet the squelch level.

e  Push and hold [SCAN](H/M/L) for 1 sec. to enter the scan-

ning type selection.

r  Rotate [DIAL] to select a desired scanning type.

• “ALL” for all memory scan; “bAnd” for band memory scan, “dUP” 

(appears only when duplex operation is set) for duplex scan.

[DIAL]

All memory scan

Band memory scan

Duplex scan

Push and hold
for 1 sec.

Rotate

tPush [SCAN](H/M/L) to start the scan.

• Scan pauses when a signal is received.
• Rotate  [DIAL] to change the scanning direction. This also 

causes the transceiver to resume scanning.

• Push [V/M/C] to stop the scan.

During memory scan

44

7

SCAN OPERATION