ICOM 325300 Manuale Utente

49

8

PRIORITY WATCH

N Priority watch operation

D Memory/call channel and memory scan watch

qSelect the VFO mode; then, set an operating frequency.

wSelect the channel(s) to be watched.

For memory channel watch:
Select a desired memory channel.
For call channel watch:
Select a desired call channel.
For memory scan watch:
± Select the memory mode, or a desired bank group.
± Push and hold [SCAN](H/M/L) for 1 sec. to enter the 

scan type selection mode.

± Rotate [DIAL] to select a desired scan type, then push 

[SCAN](H/M/L) again to start the memory/bank scan.

e  Push [SET] to enter the Set mode.

r  Rotate [DIAL] to select the priority watch set item.

t  Rotate [VOL] to select “On.”

• Select “bELL” if the priority beep function is desired.

y  Push [V/M/C] to exit the Set mode and start the watch.

• “PRIO” icon appears.
• The transceiver checks the memory/bank channel(s) or call 

channel every 5 seconds.

• The watch resumes according to the selected scan resume con-

dition. (p. 47)

u  Push [V/M/C] to cancel the watch.

Monitors VFO frequency 
for 5 sec.

Pauses on a memory
or call channel when 
a signal is received.

Sounds beep tone and blinks “

S” icon when a signal is 

received on a memory or call channel.