ICOM 325300 Manuale Utente
59
9
SET MODES
D VOX delay (VOX.DLY)
Sets the VOX delay to between “0.5,” “1.0,” “1.5,” “2.0,” “2.5”
and “3.0” (seconds).
The VOX delay is the amount of time the transmitter stays
ON after you stop speaking.
and “3.0” (seconds).
The VOX delay is the amount of time the transmitter stays
ON after you stop speaking.
(default: 0.5)
D VOX time-out timer (VOXTOT)
Sets the VOX time-out timer to between 1, 2, 3, 4, 5, 10 and
15 (minutes) to prevent accidental prolonged transmission
for the VOX function.
To turn the function OFF, select “OFF.”
15 (minutes) to prevent accidental prolonged transmission
for the VOX function.
To turn the function OFF, select “OFF.”
(default: 3)
N Initial set mode items
D Microphone simple mode (MIC S)
Microphone simple mode is used to assign the essential op-
erations to the four switches (S1 to S4) on the remote con-
trol unit. (p. 82)
erations to the four switches (S1 to S4) on the remote con-
trol unit. (p. 82)
• SImPLE
• nORm-1 (default)
• nORm-2
• nORm-1 (default)
• nORm-2
D Auto power OFF (AP OFF)
The transceiver can turn itself OFF automatically after a
specified time. Activating a control restarts the time-out. The
transceiver beeps before turning OFF.
specified time. Activating a control restarts the time-out. The
transceiver beeps before turning OFF.
30, 60, 90, 120 (minutes) and OFF (default) can be specified.
The specified period is retained even when the transceiver
is turned OFF by the auto power-off function. To cancel the
function, select “OFF.”
The specified period is retained even when the transceiver
is turned OFF by the auto power-off function. To cancel the
function, select “OFF.”