ICOM 329600 Manuale Utente
2001 NEW
46
5
MENU SCREEN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
CI-V Baudrate
Set the data transfer rate to 300, 1200, 4800, 9600,
19200 bps or AUTO.
19200 bps or AUTO.
(Default: AUTO)
AF Line Select
When the optional AD-119 is connected, select the
input for the modulation signals from an external unit,
such as an HF email modem or TNC (Terminal Node
Controller).
input for the modulation signals from an external unit,
such as an HF email modem or TNC (Terminal Node
Controller).
(Default: USB)
When MODEM is selected, the input for the modula-
tion signals is from an internal or external modem.
tion signals is from an internal or external modem.
BIT Display
Set the activation of Built-in Test display to ON or
OFF.
OFF.
(Default: ON)
When set to ON, the transceiver displays the device
check screen after turning ON the power.
check screen after turning ON the power.
CI-V Address
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-F8100’s address is 82h.
its own Icom standard address in hexadecimal code.
The IC-F8100’s address is 82h.
(Default: 82h)
If you want to initialize the operating settings in the
User Menu and Admin Menu without clearing mem-
ory channel contents or ID contents, do the following
steps.
User Menu and Admin Menu without clearing mem-
ory channel contents or ID contents, do the following
steps.
q
Turn OFF the transceiver power, if the transceiver
is powered ON.
w
While holding down [
r
] and [
s
], push [
] to turn
ON the transceiver power to reset the CPU.
/
■
CPU Reset