ICOM 332901 Manuale Utente

7

2

PANEL DESCRIPTION

■

The LED indicator indicates the status of various 
parameters of the transceiver as follows;
(Ref.; R=Red, G=Green, O=Orange)

   

  R*  

   

  R* 

TX Low BATT2

  R*

 

  R*  

  R*  

  R*

 

  O  

O     O  

  G     G  

  G     G

  G     G

G     G     G     G     G     G     G     G  

R   G   R   G   R   G   R   G   R   G   R   G   R   G   R   G

R   O   R   O   R   O   R   O   R   O   R   O   R   O   R   O

    G  

G    

  G  

Clone Err

Clone TX/RX

Low BATT1

Low BATT2

Busy

F/S Scan

Call LED Blink

Call LED ON

TX Low BATT1

  R *  

TX

• TX: Lights Red while transmitting a signal.

• RX: Lights Green while receiving a signal.

• Call LED (ON): Turns ON while receiving a matched 2/5-tone.

• Call LED (Blink): Blinks while receiving a matched 2/5-tone.

• Fast/Slow scan: Blinks when the Fast/Slow scan is activated.

• Low Battery 1: You should charge the battery. (blinks slowly)

• Low Battery 2: You must charge the battery. (blinks fast)

• TX low Battery 2: Very Low Battery was detected during TX mode.

• Channel Error: A non-programmed channel is selected.

* Lights (or blinks) orange when the optional battery case is attached.

• TX low Battery 1: Low Battery was detected during TX mode.