ICOM 332902 Manuale Utente

■

The beep function can be turned ON or OFF, and its level can be 
adjusted  between  1  and  5,  or  1  (linked)  and  5  (linked).  When  a 
Linked option is selected, the beep level is adjustable with [VOL].

q  

Rotate [VOL] to turn the trans-
ceiver power OFF.

w

  Set  [ROTARY  SELECTOR]  to 

any  channel  other  than  Chan-
nel 16.

e

  While holding down [Lower], ro-

tate [VOL] to turn ON the power 
and enter the beep level adjust-
ment mode.

r

  Push [Upper] to change the beep 

level, or push [Lower] to turn the 
beep function ON or OFF.

 • The adjustable range is 1 to 5 or

1 (Linked) to 5 (Linked).

 • If the level is set on 1 to 4 or 1

(Linked)  to  4  (Linked),  pushing 
[Upper] increases the level.

     If the level is 5 or 5 (Linked), 1 (Linked) or 1 is selected after push-

ing [Upper], respectively.

 • A  beep  sounds  after  pushing  [Upper]. Therefore,  you  can  deter-

mine the current level setting by the type of beep that sounds.

 • One beep sounds when the beep function is turned ON after push-

ing [Lower].

t

  Rotate [VOL] to turn the power OFF, then ON again to exit the 

beep level adjustment mode.

NOTE: This operation may not be available, depending on the 
presetting. Ask your dealer for details.

20

3

BASIC OPERATION