ICOM 332902 Manuale Utente

Pagina di 64
32
5
BATTERY CHARGING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
If your Ni-MH battery pack seems to have no capacity, even after 
being charged, completely discharge it by leaving the power ON 
overnight. Then, fully charge the battery pack again. If the battery 
pack still does not retain a charge (or only very little charge), a new 
battery pack must be purchased. (p. 43)
Prior to using the transceiver for the first time, the battery pack 
must be fully charged for optimum life and operation.
• Recommended temperature range for charging: 
between +10°C and +40°C (rapid charge: with BC-191) or 
between 0°C and +45°C (regular charge: with BC-192)
• Use the supplied charger or optional charger (BC-191 for rapid
charging, BC-192 for regular charging) only. 
NEVER use other 
manufacturers’ chargers.
The battery pack contains a rechargable battery.
Charge the battery pack before first operating the transceiver, or 
when the battery pack becomes exhausted.
If you want to prolong the battery life, the following points should 
be observed:
• Avoid over charging. The charging time period by the BC-192
should be less than 48 hours.
• Use  the  battery  pack  until  it  becomes  almost  completely  ex-
hausted, under normal conditions. We recommend battery charg-
ing after transmitting becomes impossible.