ICOM 333100 Manuale Utente

ii

PRECAUTIONS

RWARNING! NEVER

 connect the transceiver to an AC 

outlet. This may pose a fire hazard or result in an electric shock.

RWARNING! NEVER

 connect the transceiver to a 

power source of more than 16 V DC such as a 24 V battery. 
This connection will ruin the transceiver.

RWARNING! NEVER

 cut the DC power cable be-

tween the DC plug and fuse holder. If an incorrect connection 
is made after cutting, the transceiver might be damaged.

RWARNING! NEVER

 place the transceiver where 

normal operation of the vehicle may be hindered or where it 
could cause bodily injury.

 

 allow children to touch the trans-

ceiver.

 

  expose  the  transceiver  to  rain, 

snow or any liquids.

 the specified microphone only. Other microphones have 

different pin assignments and may damage the transceiver.

 use or place the transceiver in areas with tem-

peratures below –30°C (–22°F) or above +60°C (+140°F), or 
in areas subject to direct sunlight, such as the dashboard.

 operate the transceiver without running the ve-

hicle’s engine. The vehicle’s battery will quickly run out when 
the transceiver transmits while the vehicle’s engine is OFF.

 place the transceiver in excessively dusty envi-

ronments.

 place the transceiver against walls. This will ob-

struct heat dissipation.

 use chemical agents such as benzine or alcohol 

when cleaning, as they damage the transceiver surfaces.

 The transceiver will become hot when 

operating continuously for long periods.

For U.S.A. only
CAUTION! Changes or modifications to this transceiver, not 
expressly approved by Icom Inc., could void your authority to 
operate this transceiver under FCC regulations.

Approved Icom optional equipment is designed for optimal 
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an 
Icom transceiver in the event the Icom transceiver is used 
with  equipment  that  is  not  manufactured  or  approved  by 
Icom.