ICOM 333201 Manuale Utente

12

2

BASIC OPERATION

■

The encryption function provides private communication be-
tween stations while operating in the digital mode.

q

 Push [Encryption] to turn the encryption function ON.

  • “

” (Encryption icon) appears.

w

  Push [Encryption] again to turn the encryption function 

OFF.

  • “

” disappears.

■

The emergency call can be performed using 

[Emergency]. 

(p. 5)
When [Emergency] is pushed for the specified time period, 
the DTMF or 5-tone emergency signal is transmitted once 
or repeatedly on the emergency channel depending on the 
channel. However, when no emergency channel is specified, 
the signal is transmitted on the previously selected channel.

If you want to cancel the emergency call, hold down the key 
again before transmitting the call.

Emergency call is also available with the MDC 1200 signaling 
system. (p. 13)

■

When the specified ID, set as a stun ID or kill ID, is received, 
the stun function is activated.
When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 8) or receiving a specified 
ID, set as a revive ID, is necessary to operate the transceiver 
again in this case.
When the kill ID is received, the transceiver switches to the 
cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case.

Stun function is also available with the MDC 1200 signaling 
system. (p. 13)

■

When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.

  • Turning the power ON
     The Priority A channel is selected each time the trans-

ceiver power is turned ON.

  • Off hook.
     The Priority A channel is selected when the microphone 

is took off from its hanger.