ICOM 333202 Manuale Utente

ii

PRECAUTIONS

R WARNING! NEVER

 connect the transceiver to an 

AC outlet. This may pose a fire hazard or result in an electric 
shock.

R WARNING! NEVER

 connect the transceiver to a 

power source of more than 16 V DC or use reverse polarity. 
This could cause a fire or damage the transceiver.

R WARNING! NEVER

 cut the DC power cable be-

tween the DC plug and fuse holder. If an incorrect connection 
is made after cutting, the transceiver might be damaged.

R WARNING! NEVER

 place the transceiver where 

normal operation of the vehicle may be hindered or where it 
could cause bodily injury.

 

 allow children to touch the trans-

ceiver.

 

 expose  the  transceiver  to  rain,

snow or any liquids.

 the specified microphone only. Other microphones 

have different pin assignments and may damage the trans-
ceiver.

 use or place the transceiver in areas with tem-

peratures below –30°C (–22°F) or above +60°C (+140°F), or 
in areas subject to direct sunlight, such as the dashboard.

 operate the transceiver without running the ve-

hicle’s engine. The vehicle’s battery will quickly run out when 
the transceiver transmits while the vehicle’s engine is OFF.

place the transceiver in excessively dusty envi-

ronments.

 place the transceiver against walls. This will ob-

struct heat dissipation.

 use harsh solvents such as benzine or alcohol 

when  cleaning,  as  they  will  damage  the  transceiver  sur-
faces.

 The transceiver will become hot when 

operating continuously for long periods of time.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom 
Incorporated (Japan) in Japan, the United States, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks 
of their respective holders.