ICOM 333502 Manuale Utente
4
1
PANEL DESCRIPTION
N Programmable function keys (continued)
LONE WORKER KEY
Push to turn the Lone Worker function ON or OFF.
Push to turn the Lone Worker function ON or OFF.
s
automatically turned ON after the specified time period has passed
with no operation performed.
with no operation performed.
HIGH/LOW KEY
Push to select the transmit output power level temporarily or
permanently, depending on the preprogramming.
Push to select the transmit output power level temporarily or
permanently, depending on the preprogramming.
s
TALK AROUND KEY
Push to turn the talk around function ON or OFF.
Push to turn the talk around function ON or OFF.
s
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY
Push to toggle the IF bandwidth between wide and narrow.
Push to toggle the IF bandwidth between wide and narrow.
s
USING
CLONING
SOFTWARE
. (PMR op-
eration only) Ask your dealer for details.
DTMF AUTODIAL KEY
Push to transmit a DTMF code.
Push to transmit a DTMF code.
RE-DIAL KEY
Push to transmit the last-transmitted DTMF code.
Push to transmit the last-transmitted DTMF code.
s
CALL KEYS
0USH
0USH
s
station, depending on your signalling system.
s
PLOYS
EMERGENCY KEY
Hold down for a specified period to transmit an emergency
call.
Hold down for a specified period to transmit an emergency
call.
s
sounding and the LED indicator lighting. Ask your dealer for de-
tails.
tails.
s
before transmitting the call.
s
receiving an acknowledgement signal, or until the power is turned
OFF.
OFF.
When a matched 5-tone code signal is received, the emergency
function can be cancelled depending on the presetting. (PMR op-
eration only)
eration only)