ICOM 334000 Manuale Utente
20
7
SET MODE
D Automatic backlighting
“bL”
This function is convenient for night-time operation. The
backlight can be selected from ON and OFF.
backlight can be selected from ON and OFF.
• The backlight is automatically activated when any key except
[PTT] is pushed.
• The backlight is automatically turned OFF after 5 seconds of inac-
tivity.
D LCD contrast setting
“LC”
Set the LCD contrast level to High contrast or Low contrast.
The LCD contrast level has little effect during indoor use.
D Power Save function
“PS”
The Power Save function reduces current drain by turning
OFF the receiver circuit for preset intervals.
OFF the receiver circuit for preset intervals.
• OFF : The Power Save function is turned OFF.
• ON : The Power Save function is turned ON. The Power Save
• ON : The Power Save function is turned ON. The Power Save
function will be activated when no signal is received, and no
operation is performed for 5 seconds
operation is performed for 5 seconds
Auto backlighting ON
(default)
Auto backlighting OFF
Push
High contrast (default)
Low contrast
Push
Power Save ON
(default)
Power Save OFF
Push