ICOM 339000 Manuale Utente
18
1
ACCESS THE REPEATER
1
A
CCESS
THE REPEA
TER
Continued on the next page
☞
Push D-pad(
e
) to select the
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
access repeater is listed, and
then push D-pad(Ent).
•Example:“11:Japan”
•The repeater list, described in
•The repeater list, described in
this manual, may differ from your
transceiver’s preloaded list.
transceiver’s preloaded list.
Push D-pad(
r
) to select your
access repeater, and then
push D-pad(Ent).
push D-pad(Ent).
•Example:“Hirano”
If the selected repeater name
t
is displayed in “FROM” on
the DR mode screen, the ac-
cess repeater setting is com-
pleted.
the DR mode screen, the ac-
cess repeater setting is com-
pleted.
Completed
•Whenyouselectjusttherepeatername,therepeatercall
sign, its frequency, duplex setting, frequency offset and
Gateway call sign are automatically set.
Gateway call sign are automatically set.
•Therepeaterlist,describedinthismanual,maydifferfrom
your transceiver’s preprogrammed list.
Repeater area
Repeater
call sign
call sign
Go to step t
Completed