ICOM 339000 Manuale Utente
37
SAVING SETTINGS
9
In the DR mode, select the set-
tings to be saved into memory.
tings to be saved into memory.
w Rotate [DIAL] to select a
blankchannel.
•Whenachannelthatisalready
programed is selected, the
memory name will not be pro-
grammed.
memory name will not be pro-
grammed.
e Hold down [S.MW]
for 1
second to save the settings
into the channel.
into the channel.
•3beepssound.
•Before returning to the DR
•Before returning to the DR
mode, the saved memory con-
tents are briefly displayed.
tents are briefly displayed.
•“FROM” and “TO” names are
automatically programmed as
the Memory name.
the Memory name.
Up to 16 alphanumeric charac-
ters can be programmed for the
memory name.
memory name.
Hold down [S.MW]
q
for
1 second to enter the Select
Memory write mode.
Memory write mode.
NOTE: DO NOT hold down
[S.MW]
[S.MW]
for more than
2 seconds. Otherwise the
setting contents will be
copied to the VFO.
setting contents will be
copied to the VFO.
Go to step w
Blinks
DR mode screen
Blinks
Select Memory write mode
Shows the settings
to be saved.
to be saved.
STEP 1
Saving settings into memory
Beeps
When “FROM” (Access repeater) and “TO” (Destination) settings
are saved, the settings can be selected by rotating [DIAL].
are saved, the settings can be selected by rotating [DIAL].