ICOM 339000 Manuale Utente
45
GPS LOGGER FUNCTION
12
The GPS Logger function allows you to store the GPS position
data (Latitude, Longitude, Altitude, Positioning state, Course,
Speed and Date) onto a microSD card, as your route.
Ifyouusethisfunctionwhiledriving,youcancheckyourdriv-
ing course on a mapping software.
data (Latitude, Longitude, Altitude, Positioning state, Course,
Speed and Date) onto a microSD card, as your route.
Ifyouusethisfunctionwhiledriving,youcancheckyourdriv-
ing course on a mapping software.
NOTE:
The GPS logger function requires a microSD card.
The GPS logger function requires a microSD card.
•Seep.39formoredetails.
q Push [MENU]
to enter
the Menu screen.
Push D-pad(
Push D-pad(
w
) to select the
root item (GPS), and then
push D-pad(Ent) to go to the
next level.
push D-pad(Ent) to go to the
next level.
D-pad
(�)
(Ent)
( MENU > GPS > GPS Set>
GPS Select)
Refer to the menu sequence
e
shown directly above and
push D-pad() to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
push D-pad() to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
Push D-pad(
r
) to select “In-
ternal GPS.”
t Push [MENU]
to exit the
Menu screen.
•The GPS icon blinks when re-
ceiving data, as illustrated be-
low, and stops blinking when
valid data is received.
low, and stops blinking when
valid data is received.
➝
➝
➝
- If “Manual” is selected, the icon
does not appear.
•It may take only a few seconds
to receive, but depending on the
environment, it may take a few
minutes. If you have difficulties
receiving, we recommend that
you try a different location.
environment, it may take a few
minutes. If you have difficulties
receiving, we recommend that
you try a different location.
STEP 1
Receiving GPS data from the internal
GPS receiver
GPS receiver
Go to step r
Blinks