ICOM 340100 Manuale Utente

3

BASIC OPERATION

D

(PMR operation only)

If  the  transceiver  has  [TX  Code  CH  Select]  or  [TX  Code 
Enter] assigned, the TX code contents can be edited within 
the allowable digits.

USING [TX CODE CH SELECT] KEY:
q

  Push [TX Code CH Select] to enter the TX code channel 

selection mode.

  •  Select the desired operating channel before entering the TX 

code channel selection mode, if necessary.

w

  Push [TX Code CH Select] for 1 second to enter the TX 

code edit mode.

  • The digit to be edited blinks.

e

  Push [TX Code CH Select] to select the desired digit to be 

edited.

r

 Push [CH Up] or [CH Down] to select the desired digit.

t

  Push [TX Code CH Select] to set it. The digit to the right 

will automatically blink.

y

 Repeat r and t to edit all allowable digits.

u

 After editing, push [TX Code CH Select] to set the code.

  • Return to the standby mode.

i

 Push [Call] to transmit.

USING [TX CODE ENTER] KEY:
q

  After pushing [TX Code CH Select], push [CH Up] or [CH 

Down], or push [TX Code CH Up] or [TX Code CH Down] 
to select the desired TX code channel.

w

  Push [TX Code Enter] to enter the TX code edit mode.

  • The digit to be edited blinks.

e

  Push [TX Code Enter] to select the desired digit to be ed-

ited.

r

  Push [CH Up] or [CH Down] to select the desired digit.

t

  Push [TX Code Enter] to set. The digit to the right will au-

tomatically blink.

y

  Repeat r and t to edit all allowable digits.

u

  After editing, push [TX Code Enter] to set.

  • Return to the standby mode.

i

  Push [Call] to transmit.

D

If  the  transceiver  has  [DTMF  Autodial]  assigned,  the  au-
tomatic DTMF transmission function can be used. Up to 8 
DTMF channels are selectable.

q

 Push [DTMF Autodial]— a DTMF channel appears.

w

  Push [CH Up] or [CH Down] to select the desired DTMF 

channel.

e

  Push [DTMF Autodial] to transmit the DTMF code on the 

selected DTMF channel.

15