ICOM 349500 Manuale Utente
13
4
BASIC OPERATION
2
4
5
7
7
8
9
N Adjusting the squelch level
To adjust the transceiver’s squelch level, use the [
Y]/[Z]
keys, as described below. In order to properly receive signals,
as well as for the scan to function effectively operate, the
squelch must be adjusted to the proper level.
as well as for the scan to function effectively operate, the
squelch must be adjusted to the proper level.
q Push [
], then adjust the squelch level with [
Y]/[Z].
- “SQL” and the squelch level are displayed.
-
There are 11 squelch levels to choose from: OP is completely
open; 10 is tight squelch; 1 is loose squelch level.
open; 10 is tight squelch; 1 is loose squelch level.
-
When no key is pushed for 5 seconds, the transceiver returns to
its normal condition.
its normal condition.
w Push [
] again to return to normal operating mode.
Push
Shows the squelch
level.
level.
Appears during squelch
level adjustment
level adjustment
N AquaQuake water draining function
The AquaQuake water draining function clears water away
from the speaker grill. Without this function, water may muffle
the sound coming from the speaker. The transceiver emits a
vibrating beep when this function is activated.
from the speaker grill. Without this function, water may muffle
the sound coming from the speaker. The transceiver emits a
vibrating beep when this function is activated.
± While holding down [F], the AquaQuake function is acti-
vated to clear water away from the speaker grill.
s
s
s
function is activated.
s
speaker-microphone is connected.