ICOM 349500 Manuale Utente
20
7
FUNCTION MODE OPERATION
This transceiver has two voice recorders.
One is the manual recording function which can record for 30
seconds. The other is the automatic recording function which
can record the last 60 seconds of the receiving signal.
There are three play-back modes as follows.
One is the manual recording function which can record for 30
seconds. The other is the automatic recording function which
can record the last 60 seconds of the receiving signal.
There are three play-back modes as follows.
Push
q
[F] to enter the function mode.
s
Push
w
;(,s,/#+=
and then push [
Y]/[Z] to select the desired play back
mode from “M-PLAY,” “LAST30S,” or “LAST60S.”
If there is no recorded signal in the transceiver, “BLANK”
appears.
appears.
s
recorded signal.
s
seconds of the automati-
caliy recorded signal.
caliy recorded signal.
s
caliy recorded signal for
60 seconds.
60 seconds.
Push
e
;(,s,/#+= to play back
the recorded signal.
s
s
;(,s,/#+= again.
DO NOT detach the battery pack while
the transceiver is turned ON. Other-
wise, the data could be lost or delet-
ed.
wise, the data could be lost or delet-
ed.
Deleting a recorded signal:
While selecting the desired data to delete, hold down
While selecting the desired data to delete, hold down
;&!6s(]
for 3 seconds until 2 short beeps sound.
Blinks while playbacking.
Playback mode appears.
“BLANK” appears when
the transceiver has no
recorded signal.
the transceiver has no
recorded signal.
ding
ding
ding
Playing back for 30 seconds (maximum).
Select “M-PLAY”
Select “LAST60S”
Select “LAST30S”
Not playing back.
Playing back for 60 seconds (maximum).
Playing back for
30 seconds (maximum).
30 seconds (maximum).
N 0LAY