ICOM 350000 Manuale Utente
2001 NEW
5
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
q
RECEIVE/TRANSMIT ICON
➥
“ RX” appears when signals are received or the
squelch is open.
➥
“ TX” appears when transmitting.
w
S-METER/TX METERS
➥
Displays the receive signal strength.
➥
Displays the transmit output power.
e
TUNE ICON
Appears after the automatic antenna tuner matches
the transceiver and antenna.
NOTE:
Appears only the frequency is set to within 10 Hz
of the tuned frequency.
r
OUTPUT POWER ICON
➥
“HI” appears when high power is selected.
➥
“MID” appears when mid power is selected.
➥
“LOW” appears when low power is selected.
t
OPERATING MODE INDICATOR
Displays the selected operating mode.
• “LSB,” “USB,” “CW,” “AM,” RTTY,” “LSBD1,” “USBD1,”
“LSBD2,” “USBD2,” “LSBD3” or “USBD3” appears, de-
pending on the operating mode.
pending on the operating mode.
Selectable operating modes differ depending on the
transceiver version and/or preprogramming.
y
MUTE ICON
➥
“S” appears when the Call squelch function is se-
lected.
➥
“L” appears when the S-meter squelch is se-
lected.
➥
“V” appears when the Voice squelch is selected.
u
CLEAR TALK ICON
Appears when the Clear Talk function is ON.
i
MAIN READOUTS
<Memory Channel display>
Displays the channel name.
<VFO display>
Displays the operating frequency.
Displays the channel name.
<VFO display>
Displays the operating frequency.
o
SUB READOUTS
<Memory Channel display>
Displays the selected information.
Displays the selected information.
• ‘Frequencies,’ ‘Latitude and Longitude,’ ‘Direction and El
-
evation,’ ‘Antenna SWR and Power source voltage’ and
‘Date and Time’ can be displayed.
‘Date and Time’ can be displayed.
‘Latitude and Longitude’ and ‘Direction and Elevation’ re
-
quire data from a GPS unit.
• When the frequencies are displayed, the receive fre
-
quency is displayed on the right and the transmit fre-
quency is displayed on the left.
quency is displayed on the left.
• “u
” appears beside the receive or transmit frequencies,
and indicates which one is active.
• “p
” or “
q
” appears instead of “
u
” to the right of the re-
ceive frequency, when the Clarifier function is ON, and it
indicates the upper or lower shift.
indicates the upper or lower shift.
NOTE: No transmit frequency is displayed when
the selected channel is configured as “receive
only.”
only.”
<VFO display>
Shows the transmit or receive frequency when VFO
Shows the transmit or receive frequency when VFO
split is ON.
!0
FUNCTION DISPLAY
Displays the function of the [
§
], [
§§
] and [
§§§
] func-
tion keys.
!1
VFO ICON
<VFO display>
➥
“A” appears when VFO A is selected.
➥
“B” appears when VFO B is selected.
!2
CLARIFIER ICON
<VFO display>
“
“
p
” or “
q
” appears when the Clarifier function is
ON, and indicates the upper or lower shift.
•
Memory Channel Display
•
VFO Display
q
w
r
t
yu
q
w
r
t
y u
e
e
!1
!3
!2
i
o
i
o
!0
!0
!2
■
LCD screen
Continued on the next page.