ICOM 350000 Manuale Utente
14
3
RECEIVE AND TRANSMIT
2001 NEW
2001 NEW
Functions for receive
■
Clarifier function
D
The Clarifier function compensates for off-frequency
stations. The function shifts the receive frequency up
to ±200 Hz in 10 Hz steps, without shifting the trans-
mit frequency.
stations. The function shifts the receive frequency up
to ±200 Hz in 10 Hz steps, without shifting the trans-
mit frequency.
/
Upper shift
Lower shift
Push
q
[CLAR](7) to open the Clarifier adjustment
window.
Push
w
[
r
] or [
s
] to adjust the frequency shift.
• The transmit frequency is not shifted.
Push
e
[CLAR](7) to save the setting, and return to
the previous screen.
• If desired, push
[
8
] to cancel the setting and exit the
window .
When cancelling the Clarifier function, set the fre-
quency shift to 0 Hz in the Clarifier adjustment win-
dow.
dow.
Preamp and Attenuator
D
The preamp amplifies received signals in the front
end circuit to improve the S/N ratio and sensitivity.
Turn ON this function to better receive weak signals.
end circuit to improve the S/N ratio and sensitivity.
Turn ON this function to better receive weak signals.
The attenuator prevents strong undesired signals near
the desired frequency or near your location, such as
from a broadcast station, from causing distortion or
spurious signals.
the desired frequency or near your location, such as
from a broadcast station, from causing distortion or
spurious signals.
[Default]
/
Push
q
[
8
] to enter the Main Menu screen.
Select the “Pre Amp” item of “Setmode.”
w
q
Push [
r
] or [
s
] to select the item, and then
push [
4
] to open the screen.
(Setmode > Config)
w
Push [
r
] or [
s
] to select “Pre Amp,” and then
hold down [
4
] for 1 second.
Push
e
[
r
] or [
s
] to select the desired option, ON,
OFF or ATT ON.
• If desired, hold down
[Default](
§§
) for 1 second to re-
turn to the default setting.
Push
r
[
4
] to save the setting, and return to the pre-
vious screen.
Push
Push
t
[
8
] one or more times to exit.