ICOM 353700 Manuale Utente
17
3
BASIC OPERATION
Receiving and transmitting
■
CAUTION: Transmitting without an antenna will damage the
transceiver. See page 1 for antenna attachment.
transceiver. See page 1 for antenna attachment.
Receiving:
Rotate [VOL] to turn ON the power.
q
Rotate [ROTARY SELECTOR], or push one of the memory
w
channel keys, [MR-CH 1] to [MR-CH 4], to select a channel.
When receiving a call, adjust the audio output to a comfortable
When receiving a call, adjust the audio output to a comfortable
e
listening level.
NOTE: When a matched RX code signal is received, the trans-
ceiver automatically transmits its microphone audio for a speci-
fied time period, depending on the presetting. Ask your dealer
for details.
ceiver automatically transmits its microphone audio for a speci-
fied time period, depending on the presetting. Ask your dealer
for details.
Transmitting:
Wait for the channel to become clear to avoid interference.
Wait for the channel to become clear to avoid interference.
While holding down [PTT], speak into the microphone at a nor-
q
mal voice level.
Release [PTT] to receive.
Release [PTT] to receive.
w
IMPORTANT: To maximize the readability of your signal;
1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your
1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at a normal voice level.