ICOM 353801 Manuale Utente

12

2

PANEL DESCRIPTION

RE-DIAL
Push to transmit the last-transmitted DTMF code.

NOTE: TX memories are cleared after turning OFF the transceiver.

WIDE/NARROW
Push to toggle the IF bandwidth between Wide, Mid* or Narrow.
*  Depending on the presetting, the Mid channel width may not be 

selectable. Ask your dealer for details.

CALL, CALL A, CALL B
Push to transmit a 2/5-tone code.

•  Tone call transmission may be necessary before you call another sta-

tion, depending on your signalling system.

•  [Call  A]  and/or  [Call  B]  keys  may  be  selectable  when  your  system 

employs selective ‘Individual/Group’ calls. Ask your dealer which call 
is assigned to each key.

EMERGENCY
Hold down for specified time period to transmit an emergency call.

•  The emergency call transmits with beeps, and the LED lights red.
•  The  transceiver  can  transmit  an  emergency  call  without  the  beep 

sounding and the LED indicator lighting. Ask your dealer for details.

•  If  you  want  to  cancel  the  emergency  call,  hold  down  the  key  again 

before transmitting the call.

•  The emergency call is transmitted one time only, or repeatedly until re-

ceiving an acknowledgement signal, or until the power is turned OFF.

   When a matched 5-tone code signal is received, the emergency func-

tion can be cancelled, depending on the presetting. (PMR operation 
only)

Hold down for 1 second to turn ON the Surveillance function.

 

➥

  •  When this function is turned ON, the beep is not heard and the LED 

does not light when a signal is received, or a key is pushed.

Push to turn OFF the Surveillance function.

 

➥