ICOM 353801 Manuale Utente

28

4

dPMR OPERATION

D

When a Group call is received:

 

q

  •  The LED indicator blinks orange.
  • Beeps sound and the mute is released.

Hold down [PTT], then speak into the microphone.

 

w
 

  NOTE:  Only  one  station  is  allowed  to  speak  at  the  same 

time.

Release [PTT] to receive.

 

e

 After the communication is finished, push [Clear] to send a ‘Dis-

 

r

connect’ signal to terminate the connection.

NOTE: The LED indicator or Beeps may differ, depending on the 
presetting. Ask your dealer for details.

D

If an individual Stun or Kill call is received, the transceiver will au-
tomatically transmit an acknowledgement, and then you cannot re-
ceive* or transmit.

* Reception  may  be  available,  depending  on  the  presetting  of  the  re-

ceived stun command.

When a Stun command is received:

 

➥

  •  The transceiver cannot be operated until the individual revive call is 

received or until data cloning is performed.

  •  Even if [ROTARY SELECTOR] is changed, the transceiver will stay 

on the same channel the Stun command received on.

When a Kill command is received:

 

➥

  •  The LED indicator alternately blinks red and green.
  •  The transceiver cannot be operated until data cloning is performed. 

Ask your dealer for details.

NOTE: Depending on the presetting, the transceiver may ignore 
the Stun, Revive and Kill commands, that are from a non-speci-
fied station.