ICOM 357000 Manuale Utente
102
12
CONNECTIONS AND MAINTENANCE
./4%
t DC POWER CONNECTOR
Connects to a 13.8 V DC power source.
#!54)/. After connecting the DC power cable, NMEA
leads, external speaker leads and Hailer leads, cover the
connector and leads with an adhesive tape, as shown be-
low, to prevent water seeping into the connection.
leads, external speaker leads and Hailer leads, cover the
connector and leads with an adhesive tape, as shown be-
low, to prevent water seeping into the connection.
Rubber vulcanizing
tape
tape
y NMEA 2000 CONNECTOR
Connects to the NMEA 2000 network.
u COMMAND MICROPHONE JACK
Connects to the optional Command microphone. (p. 106)
D Connect to the MA-500TR
Connect the transceiver to the high-density D-Sub 15-pin
connector of the MA-500TR using the OPC-2014* cable. Af-
ter connecting, an Individual DSC call can be made to the
AIS target using the transponder without entering the target’s
MMSI code.
* The OPC-2014 is supplied with the MA-500TR
connector of the MA-500TR using the OPC-2014* cable. Af-
ter connecting, an Individual DSC call can be made to the
AIS target using the transponder without entering the target’s
MMSI code.
* The OPC-2014 is supplied with the MA-500TR
s
s
s
s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16