ICOM 357000 Manuale Utente
11
4
BASIC OPERATION
D Weather channels
The transceiver has 10 weather channels. These are used for
monitoring broadcasts from NOAA (National Oceanographic
and Atmospheric Administration.)
The transceiver can automatically detect a weather alert tone
on the selected weather channel or while scanning. (p. 16)
monitoring broadcasts from NOAA (National Oceanographic
and Atmospheric Administration.)
The transceiver can automatically detect a weather alert tone
on the selected weather channel or while scanning. (p. 16)
Push [CH/WX] once or twice to select a weather channel.
q
s
s
” appears when the Weather Alert function is in turned
ON. (p. 78)
Push [
w
∫](CH) or [√](CH) to select a channel.
s
Y]/[Z] on the microphone selects only Favorite chan-
nels.
When weather alert is OFF.
When weather alert is ON.
Receiving and transmitting
N
#!54)/. Transmitting without an antenna will damage
the transceiver.
the transceiver.
Hold down [PWR](Dial) to turn ON the power.
q
Set the audio and squelch levels. (p. 15)
w
First, open the squelch. Then, adjust the audio output
±
level. After that, adjust the squelch level until the noise
just disappears.
just disappears.
Change the channel group. (p. 10)
e
Push [
r
∫](CH) or [√](CH) to select a channel. (pp. 9, 10)
s
Y]/[Z] on the microphone selects only Favorite chan-
nels.
s
” appears and audio is heard.
s
Push [LO/DX] to turn the receive Attenuator function ON
t
or OFF, if necessary.
s
s
Push [HI/LO] to select the output power, if necessary.
y
s
when low power is selected.
s
power for longer distance communications.
s
u Hold down [PTT] to transmit, then speak at your normal
voice level.
s
” appears.
s