ICOM 357000 Manuale Utente
65
7
DSC OPERATION
D Receiving a Test Acknowledgement Call
When a Test Acknowledgement Call is received:
The alarm sounds for 2 minutes.
±
“Received ACK” pops up. The LCD backlight blinks for 2
±
minutes.
Received Call log
N
The transceiver automatically stores up to 50 distress mes-
sages and 50 other messages, and they can be used as a
supplement to your logbook.
sages and 50 other messages, and they can be used as a
supplement to your logbook.
s
” blinks in the upper right
corner of the LCD when there is an unread DSC message.
Distress message
D
Push the soft key [LOG] to enter “RCVD CALL LOG” in the
q
DSC CALLS menu, or you can enter it through the Menu
screen.
screen.
eMENUf
¶
eDSCf
¶
eReceived Call Logf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
Push [
w
Y] or [Z] to select “Distress,” then push [ENT].
s
s
” appears when there are unread DSC messages.
s
” appears when there are no unread DSC messages.
s
q Push [ALARM OFF] to stop
the alarm and the blinking
backlight.
backlight.
s
within 2 minutes, the next
screen may appear, depending
on the received Category.
screen may appear, depending
on the received Category.
w Push a soft key to select your
desired action.
[EXIT]
± Push to return to the nor-
mal operating mode.
s
DSC mode.
s
” continues to blink and
the Call is stored in the Re-
ceived Call Log.
ceived Call Log.