ICOM 357000 Manuale Utente
68
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSC Settings
N
D Position Input
(See page 22)
D Add Individual ID/Group ID
(See pages 19, 20)
D Delete Individual ID/Group ID
(See page 21)
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
“Auto TX” or “Manual TX.”
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
“Auto TX” or “Manual TX.”
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When “INDIVIDUAL ACK” is set to “Auto TX,” the trans-
ceiver automatically transmits the Acknowledgment call
including “Unable to Comply” (No Reason Given) after re-
ceivng the Individual call.
including “Unable to Comply” (No Reason Given) after re-
ceivng the Individual call.
q Enter either “INDIVIDUAL ACK,” “POSITION ACK” or “TEST
ACK” in the DSC Settings menu.
eMENUf
¶
eDSC SETf
¶
eIndividual ACKf
(Push [MENU]) (Select icon) (Rotate Dial, then push [ENT].)
eMENUf
¶
eDSC SETf
¶
ePosition ACKf
eMENUf
¶
eDSC SETf
¶
eTest ACKf
Rotate Dial
w
to select “Auto TX” or “Manual TX,” then push
[ENT].
s
(default)
(default)
(default)
Push [EXIT] to return to the normal operating mode.
e