ICOM 366400 Manuale Utente

1

PANEL DESCRIPTION

1-3

q

   Displays the relative receive signal strength.

w

   Displayed when low output power is selected.

e

    Displayed  when  the  channel  is  in  the ‘audible’  (un-

mute) mode.

r 

   Displayed when the Voice Scrambler function is ON.

t 

   Displayed while scanning.

y 

 Displayed when a received message (Short Data 

 

➥

Message  or  Status  Message)  is  stored  in  the 
memory stack.
 Blinks when an unread message is in the memory 

 

➥

stack.

u 

    Blinks when a matched signal is received, depend-

ing on the presetting.

i 

Displayed when position data is received.

o 

Displayed when the Horn Alert function is ON.

!0 

Displayed when the Public Address function is ON.

!1 

   Displays  the  operating  channel  number,  channel 

name, menu contents, DTMF code, and so on.

  •  The  display  mode  automatically  switches  between  one 

line and two lines.

!2 

    Display the assigned function of the [P0], [P1], [P2] 

and [P3] dealer assignable keys.

!3 

   Displayed when the scan target zone is selected.

!4 

   Displayed when the External speaker function is ON.
   When the External speaker function is ON, the PA 

speaker  that  is  connected  to  the  D-Sub  15-pin  will 
activate.

!5 

   Displayed when the AUX A port is activate.

!6 

   Displayed when the AUX B port is activate.

!7 

   Displayed when the scan target channel is selected.

!8 

   Displayed when the OST (Operator Selectable Tone) 

function is ON.

①縦横比を52×19にする。

②拡大200%

③拡大150%

q w e r t

y

u

i

o !0

!2

!1

!3

!4

!5 !6 !7 !8