ICOM 370500 Manuale Utente

2

1

PANEL DESCRIPTION

q

  Connects to the accessory connector.

  • See page 3 for accessory connector information.

w

  Connect the optional SP-22 or SP-35/SP-35L.

e

   Connects a receive antenna (impedance: 50 ø) and 

inputs receiving signals.

r

   Connects a transmit antenna (impedance: 50 ø) 

and outputs transmit signals.

t

   For an Ethernet connection. Connect the controller 

to an Ethernet [LAN] port of a PC console through 
a Hub (or a router).

   In trunking mode operation, the controller at one 

end of the chain must be connected. You can con-
trol the controller and all others in the chain from 
the PC console.

y 

   For data communication between the control-

lers in trunking mode operation, either [BUS-1] or 
[BUS-2] can be used. They enable the controllers 
to be “daisy-chained” together, and form a network 
that allows trunking and other data to pass among 
them. 

u 

 

See page 6 to replace a damaged fuse.

i 

   Connects the supplied DC power cable from this 

connector to an external 13.6 V DC power supply.

  See page 5 for the connection details.

w e

r

y

t

The optional channel extention module
can be installed.
Ask your dealer for details.

The optional trunking/network controller
can be installed.
Ask your dealer for details.

q

w

e

r

t

y

u

i

q 

  Indicates relative signal strength level.

w 

  Appears when low output power is selected.

e 

   Appears when the channel is in the ‘audible’ (un-

mute) condition.

r 

  Appears when the compander function is activated.

t 

   Appears when the voice scrambler/encryption 

function is activated.

y 

   Shows a variety of text or code information.

n

D Function display

I C O M

I n c .

q

w

e

r

t

y