ICOM 376800 Manuale Utente

– 4 –

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

Thank you for choosing this Icom product. 
READ ALL INSTRUCTIONS carefully and completely 
before using this product.

INSTRUCTIONS

VHF DIGITAL TRANSCEIVERS

Iç-F6400D

 series

UHF DIGITAL TRANSCEIVERS

 

Iç-F5400D

 series

This instruction sheet includes some functions that are 
usable only when they are preset by your dealer. The 
transceiver may have other functions and operations that 
are not described in this instruction sheet. Ask your dealer 
for preset function details.

NOTE: Some accessories may not be supplied, or the 
shape may be different, depending on the transceiver 
version.

A key element in the performance of any communication 
systems is the antenna. Contact your dealer for information 
regarding antennas and how to install them.

Fuses are installed in the supplied DC power cable. If a fuse 
blows, track down the source of the problem, repair it, and 
then replace the damaged fuse with a new rated one.
 Fuse rating: 20A
 

USE only 20 A fuses

If the transceiver becomes dusty or dirty, wipe it clean with a 
soft, dry cloth.

DO NOT use harsh solvents such as Benzine or 
alcohol, as they may damage the transceiver's 
surfaces.

Microphone

Microphone

Microphone hanger 
and screw set

Microphone hanger 
and screw set

Microphone 
hanger cable

DC power cable

Mounting bracket

Flat washers

Spring washers

Bracket bolts

Mounting screws 

(M5×12)

Self-tapping screws 

(M5×16)

Nuts

OR

Non-self-grounding type

Self-grounding type

A-7312D-1EX 

Printed in Japan

 

© 2016  Icom Inc.

– 1 –

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany, 
France, Spain, Russia, Australia, New Zealand, and/or other countries.
The Bluetooth word mark and logos are registered trademarks owned by Blue-
tooth SIG, Inc. and any use of such marks by Icom inc. is under license. 
All other products or brands are registered trademarks or trademarks of their 
respective holders.

D Icon Area

q SIGNAL STRENGTH INDICATOR
  

Displays the relative received signal strength.

w CLOCK
 

Displays the current time.

 

• “L1” is displayed when the output power is

 

set to

 

low.

 

• “L2” is displayed when the output power is set to mid.

 

• “H” is displayed when the output power is set to high.

AUDIBLE ICON 
 Displayed when the channel is in the ‘audible’ (unmute) 
mode.

MESSAGE ICON 

 

•  Displayed when a received message (Short Data Message or 

Status Message) is stored in the message memory.

 

•  Blinks when an unread message is in the message memory.

 Displayed when a matching signal is received, depending 
on the presetting.

•  Displayed while scanning.

 

• Blinks while a scan is paused.

•  Displayed when the channel is selected as a scan target channel.

 

• Displayed when the Voice Scrambler function is ON.

 

• Blinks when receiving a scrambled signal.

 

• Displayed when the Voice Encryption function is ON.

 

• Blinks when receiving an encrypted signal.

 

• Displayed when a valid position data is received.

 

• Displayed when the Record function is ON.

 

• Blinks while recording the audio.

TALK AROUND ICON 
Displayed when the Talk Around function is ON.

•  Displayed when the transceiver is connected to a telephone 

network on the selected channel.

 

• Blinks while receiving a phone call.

•  Displayed when the Broadcast Call function is ON.

 

• Blinks while receiving a Broadcast Call.

SITE LOCK ICON 
Displayed when the Site Lock function is ON.

LONE WORKER ICON 
Displayed when the Lone Worker function is ON.

NOISE CANCEL ICON
Displayed when the Noise Cancel function is ON. 

SURVEILLANCE ICON 
Displayed when the Surveillance function is ON.

VOX ICON 
Displayed when the VOX function is ON.

 

• Displayed when Bluetooth

® 

is activated.

 

• Lights Blue when a Bluetooth

®

 device is connected.

 

•  Does not light when there is no Bluetooth

®

 device connected. 

Displayed when a microSD card is inserted. 

   “R” is displayed when the microSD card has not been formatted.

USB ICON 
Displayed when a USB device is connected.

D Text Area

Displays the selected Zone number, Channel number, and 
Channel name, if set.

D Key Icon Area

Displays the assigned function of [P1] and [P2]. 

  Ask your dealer about the assigned Software key function.

Icon Area

Text Area

Key Icon Area

q

w

NOTE: The screen capture 
shows an example. 
Display position of each 
icon differ, depending on 
the function being used.

Displays the selected 
channel number.