ICOM 382200 Manuale Utente

6

3

PANEL DESCRIPTION

r STATUS ICON

 

•  “STBY” is displayed while not receiving nor transmitting.

 

•   “RT” (Radio Telephone mode) is displayed while 

receiving or transmitting a signal or when the squelch 
opens. (p. 13, 56)

 

• “DSC” is displayed while in the DSC mode. 

t CHANNEL NAME

 

• The channel name is displayed, if entered. (p. 15)

 

• “SCAN” or “SCAN 16” is displayed while scanning. (p. 16)

 

•  “DUAL 16” or “TRI 16” is displayed while using the 

Dualwatch or Tri-watch function. (p. 18)

y POSITION/TIME INDICATOR 
   Displays the current position and time when valid GPS 

data is received, or when manually entered.

 

 

•  “??”

 blinks if no GPS data is received for 30 seconds after 

receiving valid GPS data, and then “??” and a warning message 
are displayed alternately after 10 minutes.

 

•  A warning message is displayed if no GPS data is received for 4 

hours after receiving valid GPS data.

 

•  “No Position No Time” is displayed if no GPS data is received 

for 2 minutes after turning ON the transceiver, and then a 
warning message is displayed.

L “Local” is displayed when the UTC Offset time is set. (p. 21)

 

 

•  A manually entered GPS data is valid for 4 hours, and then a 

warning message is displayed after 4 hours.

L “Manual” is displayed.

u SOFTWARE KEY FUNCTION DISPLAY (p. 7, p. 14)

 

• The software key functions are displayed.

 

•  “Key Locked” is displayed while the Lock function is ON.

i CHANNEL NUMBER READOUT 
  Displays the selected operating channel number.

L“A” is displayed when a simplex channel is selected.

o CALL CHANNEL ICON (p. 11)
 

Displayed when a Call channel is selected.

!0 FAVORITE CHANNEL ICON (p. 17)
   Displayed when a Favorite channel is selected.
!1 MAIL ICON (p. 40)

 

•  Displayed when there is an unread message.

 

• Blinks until one of the call messages is read. 

!2 DSC SWITCH ICON (p. 42)

 

•  Displayed when the “CH Auto Switch” is set to “Ignore” 

or “Manual”

 

•  Blinks when the “DSC Switch” is OFF.

!3 BATTERY INDICATOR
 

Displays the battery’s remaining power.

!4 GPS ICON

 

•  Stays ON while valid GPS position data is received.

 

• Blinks while no position data is received.

!5 CHANNEL GROUP ICON

 

•  The selected Channel Group’s icon is displayed.

 

•  “WX”  is displayed for the Weather channel in the USA, 

Australian, and Export versions. (p. 12)

blinks when the battery is overcharged (or over voltage)

Indication

Battery level

Full

Mid

Charging 

required

Battery 

exhausted